1C के लिए DBMS MS SQL सर्वर डेवलपर 2016 और PostgreSQL 10.5 के प्रदर्शन पर शोध करना

1. postgresql.conf:
   मूल सेटिंग्स को कैलकुलेटर का उपयोग करके बनाया गया था - pgconfigurator.cybertec.at , पैरामीटर विशाल_पृष्ठ, चेकपॉइंट_टाइम, मैक्स_वाल_साइज़, min_wal_size, random_page_cost, जो प्रकाशन के अंत में उल्लिखित स्रोतों से प्राप्त जानकारी के आधार पर हैं। अस्थायी रूप से टेबल्स का उपयोग करने वाले सुझाव के आधार पर, temp_buffers पैरामीटर का मान बढ़ा,
   
   

   listen_addresses = '*' max_connections = 1000 #     .          .    32     25%    . shared_buffers = 9GB #   (  Linux - vm.nr_hugepages). huge_pages = on #      . temp_buffers = 256MB #      ORDER BY, DISTINCT, merge joins, join, hash-based aggregation, hash-based processing of IN subqueries. #  ,  1     ( "Mostly complicated real-time SQL queries"  ).     64MB. work_mem = 128MB #    . VACUUM,  , etc. maintenance_work_mem = 512MB #    (vm.dirty_background_bytes, vm.dirty_bytes),        IO   CHECKPOINT. checkpoint_timeout = 30min max_wal_size = 3GB min_wal_size = 512MB checkpoint_completion_target = 0.9 seq_page_cost = 1 #   .  - - 4.  RAID10  . random_page_cost = 2.5 #       postgres ,    PageCache. effective_cache_size = 22GB 

   
   
2. कर्नेल, OS पैरामीटर:
   
   ट्यून डेमॉन के लिए प्रोफाइल फाइल फॉर्मेट में सेटिंग्स सेट की जाती हैं:
   
   

    [sysctl] #     (PageCache),       /     . #-    (10,30)               /. #    CHECKPOINT     I/O. #       RAID-  write-back cache  512MB. vm.dirty_background_bytes = 67108864 vm.dirty_bytes = 536870912 # SWAP -.    ,    OOM. vm.swappiness = 1 # ,        CPU. #         CPU  . #    . kernel.sched_migration_cost_ns = 5000000 #    CPU   . #       0.    . kernel.sched_autogroup_enabled = 0 #    .     . #     - https://www.postgresql.org/docs/11/kernel-resources.html#LINUX-HUGE-PAGES vm.nr_hugepages = 5000 [vm] #   .         ,    .  ,     . transparent_hugepages=never #  CPU.       ,      . [cpu] force_latency=1 governor=performance energy_perf_bias=performance min_perf_pct=100 

   
   
3. फाइल सिस्टम:
   
   

    # : #stride  stripe_width    RAID 10  6-    stripe  1024kb mkfs.ext4 -E stride=256,stripe_width=768 /dev/sdb # : /dev/sdb /var/lib/pgsql ext4 noatime,nodiratime,data=ordered,barrier=0,errors=remount-ro 0 2 #noatime,nodiratime -         #data=ordered -     .     #barrier=0 -       .  RAID-     . 

 # ----------------------------- # PostgreSQL configuration file # ----------------------------- # # This file consists of lines of the form: # # name = value # # (The "=" is optional.) Whitespace may be used. Comments are introduced with # "#" anywhere on a line. The complete list of parameter names and allowed # values can be found in the PostgreSQL documentation. # # The commented-out settings shown in this file represent the default values. # Re-commenting a setting is NOT sufficient to revert it to the default value; # you need to reload the server. # # This file is read on server startup and when the server receives a SIGHUP # signal. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, run "pg_ctl reload", or execute # "SELECT pg_reload_conf()". Some parameters, which are marked below, # require a server shutdown and restart to take effect. # # Any parameter can also be given as a command-line option to the server, eg, # "postgres -c log_connections=on". Some parameters can be changed at run time # with the "SET" SQL command. # # Memory units: kB = kilobytes Time units: ms = milliseconds # MB = megabytes s = seconds # GB = gigabytes min = minutes # TB = terabytes h = hours # d = days #------------------------------------------------------------------------------ # FILE LOCATIONS #------------------------------------------------------------------------------ # The default values of these variables are driven from the -D command-line # option or PGDATA environment variable, represented here as ConfigDir. #data_directory = 'ConfigDir' # use data in another directory # (change requires restart) #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file # (change requires restart) #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file # (change requires restart) # If external_pid_file is not explicitly set, no extra PID file is written. #external_pid_file = '' # write an extra PID file # (change requires restart) #------------------------------------------------------------------------------ # CONNECTIONS AND AUTHENTICATION #------------------------------------------------------------------------------ # - Connection Settings - listen_addresses = '*' # what IP address(es) to listen on; # comma-separated list of addresses; # defaults to 'localhost'; use '*' for all # (change requires restart) #port = 5432 # (change requires restart) max_connections = 1000 # (change requires restart) #superuser_reserved_connections = 3 # (change requires restart) #unix_socket_directories = '/var/run/postgresql, /tmp' # comma-separated list of directories # (change requires restart) #unix_socket_group = '' # (change requires restart) #unix_socket_permissions = 0777 # begin with 0 to use octal notation # (change requires restart) #bonjour = off # advertise server via Bonjour # (change requires restart) #bonjour_name = '' # defaults to the computer name # (change requires restart) # - Security and Authentication - #authentication_timeout = 1min # 1s-600s ssl = off #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers #ssl_prefer_server_ciphers = on #ssl_ecdh_curve = 'prime256v1' #ssl_dh_params_file = '' #ssl_cert_file = 'server.crt' #ssl_key_file = 'server.key' #ssl_ca_file = '' #ssl_crl_file = '' #test #password_encryption = md5 # md5 or scram-sha-256 #db_user_namespace = off row_security = off # GSSAPI using Kerberos #krb_server_keyfile = '' #krb_caseins_users = off # - TCP Keepalives - # see "man 7 tcp" for details #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; # 0 selects the system default #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; # 0 selects the system default #tcp_keepalives_count = 0 # TCP_KEEPCNT; # 0 selects the system default #------------------------------------------------------------------------------ # RESOURCE USAGE (except WAL) #------------------------------------------------------------------------------ # - Memory - shared_buffers = 9GB # min 128kB # (change requires restart) huge_pages = on # on, off, or try # (change requires restart) temp_buffers = 256MB # min 800kB #max_prepared_transactions = 0 # zero disables the feature # (change requires restart) # Caution: it is not advisable to set max_prepared_transactions nonzero unless # you actively intend to use prepared transactions. # work_mem = 128MB # min 64kB maintenance_work_mem = 512MB # min 1MB #replacement_sort_tuples = 150000 # limits use of replacement selection sort #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem #max_stack_depth = 2MB # min 100kB dynamic_shared_memory_type = posix # the default is the first option # supported by the operating system: # posix # sysv # windows # mmap # use none to disable dynamic shared memory # (change requires restart) # - Disk - #temp_file_limit = -1 # limits per-process temp file space # in kB, or -1 for no limit # - Kernel Resource Usage - max_files_per_process = 10000 # min 25 # (change requires restart) shared_preload_libraries = 'online_analyze, plantuner' # (change requires restart) # - Cost-Based Vacuum Delay - #vacuum_cost_delay = 0 # 0-100 milliseconds #vacuum_cost_page_hit = 1 # 0-10000 credits #vacuum_cost_page_miss = 10 # 0-10000 credits #vacuum_cost_page_dirty = 20 # 0-10000 credits #vacuum_cost_limit = 200 # 1-10000 credits # - Background Writer - bgwriter_delay = 20ms # 10-10000ms between rounds bgwriter_lru_maxpages = 400 # 0-1000 max buffers written/round bgwriter_lru_multiplier = 4.0 # 0-10.0 multiplier on buffers scanned/round bgwriter_flush_after = 0 # measured in pages, 0 disables # - Asynchronous Behavior - effective_io_concurrency = 3 # 1-1000; 0 disables prefetching max_worker_processes = 8 # (change requires restart) max_parallel_workers_per_gather = 4 # taken from max_parallel_workers max_parallel_workers = 8 # maximum number of max_worker_processes that # can be used in parallel queries #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate # (change requires restart) #backend_flush_after = 0 # measured in pages, 0 disables #------------------------------------------------------------------------------ # WRITE AHEAD LOG #------------------------------------------------------------------------------ # - Settings - wal_level = minimal # minimal, replica, or logical # (change requires restart) #fsync = on # flush data to disk for crash safety # (turning this off can cause # unrecoverable data corruption) #synchronous_commit = on # synchronization level; # off, local, remote_write, remote_apply, or on wal_sync_method = fdatasync # the default is the first option # supported by the operating system: # open_datasync # fdatasync (default on Linux) # fsync # fsync_writethrough # open_sync #wal_sync_method = open_datasync #full_page_writes = on # recover from partial page writes wal_compression = on # enable compression of full-page writes #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers # (change requires restart) wal_writer_delay = 200ms # 1-10000 milliseconds wal_writer_flush_after = 1MB # measured in pages, 0 disables commit_delay = 1000 # range 0-100000, in microseconds #commit_siblings = 5 # range 1-1000 # - Checkpoints - checkpoint_timeout = 30min # range 30s-1d max_wal_size = 3GB min_wal_size = 512MB checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 #checkpoint_flush_after = 256kB # measured in pages, 0 disables #checkpoint_warning = 30s # 0 disables # - Archiving - #archive_mode = off # enables archiving; off, on, or always # (change requires restart) #archive_command = '' # command to use to archive a logfile segment # placeholders: %p = path of file to archive # %f = file name only # eg 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' #archive_timeout = 0 # force a logfile segment switch after this # number of seconds; 0 disables #------------------------------------------------------------------------------ # REPLICATION #------------------------------------------------------------------------------ # - Sending Server(s) - # Set these on the master and on any standby that will send replication data. max_wal_senders = 0 # max number of walsender processes # (change requires restart) #wal_keep_segments = 130 # in logfile segments, 16MB each; 0 disables #wal_sender_timeout = 60s # in milliseconds; 0 disables #max_replication_slots = 10 # max number of replication slots # (change requires restart) #track_commit_timestamp = off # collect timestamp of transaction commit # (change requires restart) # - Master Server - # These settings are ignored on a standby server. #synchronous_standby_names = '' # standby servers that provide sync rep # method to choose sync standbys, number of sync standbys, # and comma-separated list of application_name # from standby(s); '*' = all #vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed # - Standby Servers - # These settings are ignored on a master server. #hot_standby = on # "off" disallows queries during recovery # (change requires restart) #max_standby_archive_delay = 30s # max delay before canceling queries # when reading WAL from archive; # -1 allows indefinite delay #max_standby_streaming_delay = 30s # max delay before canceling queries # when reading streaming WAL; # -1 allows indefinite delay #wal_receiver_status_interval = 10s # send replies at least this often # 0 disables #hot_standby_feedback = off # send info from standby to prevent # query conflicts #wal_receiver_timeout = 60s # time that receiver waits for # communication from master # in milliseconds; 0 disables #wal_retrieve_retry_interval = 5s # time to wait before retrying to # retrieve WAL after a failed attempt # - Subscribers - # These settings are ignored on a publisher. #max_logical_replication_workers = 4 # taken from max_worker_processes # (change requires restart) #max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers #------------------------------------------------------------------------------ # QUERY TUNING #------------------------------------------------------------------------------ # - Planner Method Configuration - #enable_bitmapscan = on #enable_hashagg = on #enable_hashjoin = on #enable_indexscan = on #enable_indexonlyscan = on #enable_material = on #enable_mergejoin = on #enable_nestloop = on #enable_seqscan = on #enable_sort = on #enable_tidscan = on # - Planner Cost Constants - seq_page_cost = 1 # measured on an arbitrary scale random_page_cost = 2.5 # same scale as above #cpu_tuple_cost = 0.01 # same scale as above #cpu_index_tuple_cost = 0.005 # same scale as above #cpu_operator_cost = 0.0025 # same scale as above #parallel_tuple_cost = 0.1 # same scale as above #parallel_setup_cost = 1000.0 # same scale as above #min_parallel_table_scan_size = 8MB #min_parallel_index_scan_size = 512kB effective_cache_size = 22GB # - Genetic Query Optimizer - #geqo = on #geqo_threshold = 12 #geqo_effort = 5 # range 1-10 #geqo_pool_size = 0 # selects default based on effort #geqo_generations = 0 # selects default based on effort #geqo_selection_bias = 2.0 # range 1.5-2.0 #geqo_seed = 0.0 # range 0.0-1.0 # - Other Planner Options - #default_statistics_target = 100 # range 1-10000 #constraint_exclusion = partition # on, off, or partition #cursor_tuple_fraction = 0.1 # range 0.0-1.0 from_collapse_limit = 20 join_collapse_limit = 20 # 1 disables collapsing of explicit # JOIN clauses #force_parallel_mode = off #------------------------------------------------------------------------------ # ERROR REPORTING AND LOGGING #------------------------------------------------------------------------------ # - Where to Log - log_destination = 'stderr' # Valid values are combinations of # stderr, csvlog, syslog, and eventlog, # depending on platform. csvlog # requires logging_collector to be on. # This is used when logging to stderr: logging_collector = on # Enable capturing of stderr and csvlog # into log files. Required to be on for # csvlogs. # (change requires restart) # These are only used if logging_collector is on: log_directory = 'pg_log' # directory where log files are written, # can be absolute or relative to PGDATA log_filename = 'postgresql-%a.log' # log file name pattern, # can include strftime() escapes #log_file_mode = 0600 # creation mode for log files, # begin with 0 to use octal notation log_truncate_on_rotation = on # If on, an existing log file with the # same name as the new log file will be # truncated rather than appended to. # But such truncation only occurs on # time-driven rotation, not on restarts # or size-driven rotation. Default is # off, meaning append to existing files # in all cases. log_rotation_age = 1d # Automatic rotation of logfiles will # happen after that time. 0 disables. log_rotation_size = 0 # Automatic rotation of logfiles will # happen after that much log output. # 0 disables. # These are relevant when logging to syslog: #syslog_facility = 'LOCAL0' #syslog_ident = 'postgres' #syslog_sequence_numbers = on #syslog_split_messages = on # This is only relevant when logging to eventlog (win32): # (change requires restart) #event_source = 'PostgreSQL' # - When to Log - #client_min_messages = notice # values in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # log # notice # warning # error #log_min_messages = warning # values in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # log # fatal # panic #log_min_error_statement = error # values in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # log # fatal # panic (effectively off) #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements # and their durations, > 0 logs only # statements running at least this number # of milliseconds # - What to Log - #debug_print_parse = off #debug_print_rewritten = off #debug_print_plan = off #debug_pretty_print = on log_checkpoints = on log_connections = on log_disconnections = on log_duration = on #log_error_verbosity = default # terse, default, or verbose messages #log_hostname = off log_line_prefix = '< %m >' # special values: # %a = application name # %u = user name # %d = database name # %r = remote host and port # %h = remote host # %p = process ID # %t = timestamp without milliseconds # %m = timestamp with milliseconds # %n = timestamp with milliseconds (as a Unix epoch) # %i = command tag # %e = SQL state # %c = session ID # %l = session line number # %s = session start timestamp # %v = virtual transaction ID # %x = transaction ID (0 if none) # %q = stop here in non-session # processes # %% = '%' # eg '<%u%%%d> ' log_lock_waits = on # log lock waits >= deadlock_timeout log_statement = 'all' # none, ddl, mod, all #log_replication_commands = off log_temp_files = 0 # log temporary files equal or larger # than the specified size in kilobytes; # -1 disables, 0 logs all temp files log_timezone = 'W-SU' # - Process Title - #cluster_name = '' # added to process titles if nonempty # (change requires restart) #update_process_title = on #------------------------------------------------------------------------------ # RUNTIME STATISTICS #------------------------------------------------------------------------------ # - Query/Index Statistics Collector - #track_activities = on #track_counts = on #track_io_timing = on #track_functions = none # none, pl, all #track_activity_query_size = 1024 # (change requires restart) #stats_temp_directory = 'pg_stat_tmp' # - Statistics Monitoring - #log_parser_stats = off #log_planner_stats = off #log_executor_stats = off #log_statement_stats = off #------------------------------------------------------------------------------ # AUTOVACUUM PARAMETERS #------------------------------------------------------------------------------ autovacuum = on # Enable autovacuum subprocess? 'on' # requires track_counts to also be on. log_autovacuum_min_duration = 0 # -1 disables, 0 logs all actions and # their durations, > 0 logs only # actions running at least this number # of milliseconds. autovacuum_max_workers = 4 # max number of autovacuum subprocesses # (change requires restart) #autovacuum_naptime = 20s # time between autovacuum runs #autovacuum_vacuum_threshold = 50 # min number of row updates before # vacuum #autovacuum_analyze_threshold = 50 # min number of row updates before # analyze #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum # (change requires restart) #autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age # before forced vacuum # (change requires restart) #autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for # autovacuum, in milliseconds; # -1 means use vacuum_cost_delay #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for # autovacuum, -1 means use # vacuum_cost_limit #------------------------------------------------------------------------------ # CLIENT CONNECTION DEFAULTS #------------------------------------------------------------------------------ # - Statement Behavior - #search_path = '"$user", public' # schema names #default_tablespace = '' # a tablespace name, '' uses the default #temp_tablespaces = '' # a list of tablespace names, '' uses # only default tablespace #check_function_bodies = on #default_transaction_isolation = 'read committed' #default_transaction_read_only = off #default_transaction_deferrable = off #session_replication_role = 'origin' #statement_timeout = 0 # in milliseconds, 0 is disabled #lock_timeout = 0 # in milliseconds, 0 is disabled #idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled #vacuum_freeze_min_age = 50000000 #vacuum_freeze_table_age = 150000000 #vacuum_multixact_freeze_min_age = 5000000 #vacuum_multixact_freeze_table_age = 150000000 #bytea_output = 'hex' # hex, escape #xmlbinary = 'base64' #xmloption = 'content' #gin_fuzzy_search_limit = 0 #gin_pending_list_limit = 4MB # - Locale and Formatting - datestyle = 'iso, dmy' #intervalstyle = 'postgres' timezone = 'W-SU' #timezone_abbreviations = 'Default' # Select the set of available time zone # abbreviations. Currently, there are # Default # Australia (historical usage) # India # You can create your own file in # share/timezonesets/. #extra_float_digits = 0 # min -15, max 3 #client_encoding = sql_ascii # actually, defaults to database # encoding # These settings are initialized by initdb, but they can be changed. lc_messages = 'ru_RU.UTF-8' # locale for system error message # strings lc_monetary = 'ru_RU.UTF-8' # locale for monetary formatting lc_numeric = 'ru_RU.UTF-8' # locale for number formatting lc_time = 'ru_RU.UTF-8' # locale for time formatting # default configuration for text search default_text_search_config = 'pg_catalog.russian' # - Other Defaults - #dynamic_library_path = '$libdir' #local_preload_libraries = '' #session_preload_libraries = '' #------------------------------------------------------------------------------ # LOCK MANAGEMENT #------------------------------------------------------------------------------ #deadlock_timeout = 1s max_locks_per_transaction = 256 # min 10 # (change requires restart) #max_pred_locks_per_transaction = 64 # min 10 # (change requires restart) #max_pred_locks_per_relation = -2 # negative values mean # (max_pred_locks_per_transaction # / -max_pred_locks_per_relation) - 1 #max_pred_locks_per_page = 2 # min 0 #------------------------------------------------------------------------------ # VERSION/PLATFORM COMPATIBILITY #------------------------------------------------------------------------------ # - Previous PostgreSQL Versions - #array_nulls = on #backslash_quote = safe_encoding # on, off, or safe_encoding #default_with_oids = off escape_string_warning = off #lo_compat_privileges = off #operator_precedence_warning = off #quote_all_identifiers = off standard_conforming_strings = off #synchronize_seqscans = on # - Other Platforms and Clients - #transform_null_equals = off #------------------------------------------------------------------------------ # ERROR HANDLING #------------------------------------------------------------------------------ #exit_on_error = off # terminate session on any error? #restart_after_crash = on # reinitialize after backend crash? #------------------------------------------------------------------------------ # CONFIG FILE INCLUDES #------------------------------------------------------------------------------ # These options allow settings to be loaded from files other than the # default postgresql.conf. #include_dir = 'conf.d' # include files ending in '.conf' from # directory 'conf.d' #include_if_exists = 'exists.conf' # include file only if it exists #include = 'special.conf' # include file #------------------------------------------------------------------------------ # CUSTOMIZED OPTIONS #------------------------------------------------------------------------------ online_analyze.threshold = 50 online_analyze.scale_factor = 0.1 online_analyze.enable = on online_analyze.verbose = off online_analyze.local_tracking = on online_analyze.min_interval = 10000 online_analyze.table_type = 'temporary' online_analyze.verbose='off' plantuner.fix_empty_table='on' 

1. ब्लॉक 1 "_" - "माल और सेवाओं की प्राप्ति"
   
   • प्रतिपक्ष निर्देशिका खुलती है
   • निर्देशिका "ठेकेदार" का एक नया तत्व "आपूर्तिकर्ता" की दृष्टि से बनाया गया है
   • "अनुबंध" निर्देशिका का एक नया तत्व एक नए प्रतिपक्ष के लिए "आपूर्तिकर्ता के साथ" दृश्य के साथ बनाया गया है
   • निर्देशिका "नामकरण" खुलती है
   • निर्देशिका के तत्वों का एक सेट "नामकरण" प्रकार "उत्पाद" के साथ बनाया गया है
   • निर्देशिका के तत्वों का एक सेट "नामकरण" प्रकार "सेवा" के साथ बनाया गया है
   • दस्तावेजों की सूची "माल और सेवाओं की रसीदें" खुलती है।
   • एक नया दस्तावेज़ "गुड्स एंड सर्विसेस रसीद" बनाया जाता है जिसमें सारणीबद्ध भाग "गुड्स" और "सर्विसेज" बनाए गए डेटा सेट से भरे होते हैं।
   • रिपोर्ट "खाता कार्ड 41" चालू माह के लिए उत्पन्न हुई है (यदि अतिरिक्त गठन के लिए अंतराल का संकेत दिया गया है)
   
   
2. ब्लॉक 2 "_" - "माल और सेवाओं की बिक्री"
   
   
   • प्रतिपक्ष निर्देशिका खुलती है
   • "समकक्षों" निर्देशिका का एक नया तत्व "क्रेता" दृश्य के साथ बनाया गया है
   • "कॉन्ट्रैक्ट्स" निर्देशिका का एक नया तत्व एक नए प्रतिपक्ष के लिए "क्रेता के साथ" दृश्य के साथ बनाया गया है
   • दस्तावेजों की एक सूची "माल और सेवाओं की बिक्री" खुलती है।
   • एक नया दस्तावेज़ "वस्तुओं और सेवाओं की बिक्री" बनाया जाता है जिसमें सारणीबद्ध भाग "माल" और "सेवाएं" पहले से बनाए गए डेटा से निर्दिष्ट मापदंडों के अनुसार भरे जाते हैं।
   • रिपोर्ट "खाता कार्ड 41" चालू माह के लिए उत्पन्न हुई है (यदि अतिरिक्त गठन के लिए अंतराल का संकेत दिया गया है)
3. चालू माह के लिए "खाता कार्ड 41" रिपोर्ट तैयार की गई है

1. रिपोर्ट "खाता कार्ड 41" वर्ष की शुरुआत से महीने के अंत तक उत्पन्न होती है
2. रिपोर्ट "टर्नओवर बैलेंस शीट" वर्ष की शुरुआत से महीने के अंत तक उत्पन्न होती है
3. नियामक प्रक्रिया "महीने का समापन" किया जा रहा है।

1. व्यक्तिगत इकाइयों को निष्क्रिय / सक्षम करने की क्षमता
2. प्रत्येक ब्लॉक के लिए दस्तावेजों की कुल संख्या निर्दिष्ट करने की क्षमता
3. प्रति दिन प्रत्येक ब्लॉक के लिए दस्तावेजों की संख्या निर्दिष्ट करने की क्षमता
4. दस्तावेजों के भीतर माल और सेवाओं की मात्रा को इंगित करने की क्षमता
5. रिकॉर्डिंग के लिए मात्रात्मक और मूल्य संकेतकों की सूची निर्धारित करने की क्षमता। दस्तावेजों में मूल्यों के विभिन्न सेट बनाने के लिए कार्य करता है

1. "पहला परीक्षण।" , « »
   
   • — 20 . 1 . : 50 «», 50 «», 100 «», 50 «» + «», 50 «» + «», 2 « ». 1 1
   
   
2. « ». ,
   
   
   • — 50-60 . 3 . : 90 «», 90 «», 540 «», 90 «» + «», 90 «» + «», 3 « ». 3 3
   
   
3. « ». . .
   
   • — 40-60 . 2 . : 50 «», 50 «», 300 «», 50 «» + «», 50 «» + «». 3 3
   
   

1. , :
   
   
   • « »
2. « » « »
3. 1 "*.dt"
4. « »